PCI PTR-3.00 Cam Follower and Track Roller - Stud Type

d1 ≈:645 mm; D1 ≈:735 mm; d:609.6 mm; Basic dynamic load rating C:9680 kN; Thrust factor K:1.61; r1,2 min.:3.3 mm; Calculation factor Y0:1.8; Comparative axial load rating CFa:457 kN; Mass bearing:695 kg; Calculation factor e:0.37;

P60°:423 kN; R1:130.175 mm; R2:46.831 mm; Eye bolt:2 x 1/2-13 UNC; Cap bolt, SAE grade:5; Adapter sleeve assembly:SNW 44x7.15/16; Ca:117.805 mm; ba:90.487 mm; P150°:145 kN; S:4.763 mm;

d:160.000 mm; Accessories:Without Accessories; Sealed Speed Rating n3:0 rpm; B:20.00 mm; Basic Static Radial Load Rating Co:60000 N; Oil Speed Rating Open/Shielded n2:3400 rpm; Grease Speed Rating Open/Shielded n1:2800 rpm; Basic Dynamic Radial Load Rating C:49400 N; D:200.0000 mm; Fillet Radius ra:

D:800 mm; r1,2 min.:5 mm; Fatigue load limit Pu:1460 kN; Limiting speed:700 r/min; s:321 mm; d1 ≈:760 mm; d:600 mm; C:60 mm; B:39 mm; B1:117 mm;

Material constant KM:330; C1 max.:28 mm; l1 min.:92 mm; d:45 mm; Mass rod end:2.45 kg; dk:60 mm; G:M 42x3; l2 max.:217 mm; Specific dynamic load factor K:150 N/mm²; l7 min.:50 mm;

N1:25.4 mm; R2:36.513 mm; PG:1/4 NPT; A2:274.637 mm; RG:1/2 NPT; da:131.762 mm; End plug (suffix Y):EPR 16; R1:79.375 mm; h:56.356 mm; Taconite seal:TER 125;

Oil Speed Rating n2:5000 rpm; D:130.0000 mm; Basic Dynamic Radial Load Rating C:153000 N; d:50.000 mm; Grease Speed Rating n1:4200 rpm; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; B:62.00 mm; Basic Static Radial Load Rating Co:156000 N;

r1 max.:0.8 mm; r2 max.:1 mm; Dw:5 mm; r1,2 min.:0.3 mm; Mass needle roller:4.28 g; Lw:27.8 mm;

D1:103 mm; B:14.5 mm; Mass housing washer:1.69 kg; D:170 mm; r1,2 min.:1.5 mm;

Fillet Radius ra:3.00 mm; Basic Dynamic Radial Load Rating C:436000 N; B:130.00 mm; Basic Static Radial Load Rating Co:560000 N; D:290.0000 mm; Grease Speed Rating n1:1500 rpm; d:105.000 mm; Oil Speed Rating n2:2600 rpm; Fillet Radius rb:1.00 mm;

Basic Static Radial Load Rating Co:143000 N; D:240.0000 mm; B:38.00 mm; Basic Dynamic Radial Load Rating C:143000 N; Oil Speed Rating Open/Shielded n2:3000 rpm; d:160.000 mm; Sealed Speed Rating n3:1600 rpm; Grease Speed Rating Open/Shielded n1:2400 rpm; Fillet Radius ra:2.00 mm; Accessories:Two Sea

d1:70 mm; static Cor:126.000 kN; Pu:5.730 kN; Grease:2 700 min-1; dynamic Cr:79.240 kN; d:30 mm; D:70 mm; rs (min):1 mm; H:28 mm; D1:32 mm;

Initial grease fill:2749.95 g; Mass pillow block:351 kg; P60°:691 kN; h:69.85 mm; P120°:260 kN; Bearing:23052 CCK/W33; H1:241.3 mm; P180°:285 kN; Cap bolt recommended tightening torque:4284.4 N·m; L:831.85 mm;

d:240 mm; Static (Cor):13.9 mm; rs (min):3 mm; Pu:1260 kN; with cylindrical bore:1 000 min-1; with tapered bore:1 400 min-1; B:92 mm; Dynamic (Cr):7.5 mm; Grease:2310 kN; Oil:202.610 kN;

Limiting speed:1900 r/min; Fatigue load limit Pu:81.5 kN; D:170 mm; Housing washer:GS 81126; Universal washer:LS 130170; Reference speed:950 r/min; Shaft washer:WS 81126; Eb:165 mm; Ea:135 mm; d:130 mm;