SKF 6216 RSJEM Single Row Ball Bearings

N:18 mm; Shaft Diameter db:85 mm; Housing Mass:13.1 Kg; End Cover1:EC518-615; H2:35.0 mm; A:140.00 mm; Seal:TSNG315; J2:317 mm; N1:24.00 mm; C0 Static Load Rating:510;

Basic Dynamic Load Rating Cr(N):57500; Lubrication method:Oil Supply Type; Rolling Element Material:Steel; Bearing Unit, Type:Pillow Type; d:60; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Unit, Type:Bearing unit; Pillow Type, Category:Standard; Unit, Type:Bearing unit;

Fatigue limit load, Cu:218 kN; B:106 mm; Min operating temperature, Tmin:-40 °C; Nlim:1,700 rpm; Nref:1,200 rpm; Static load, C0:3,150 kN; Characteristic outer ring frequency, BPF0:11.12 Hz; Y1:3.07; da min:294.6 mm; Number of lubrication holes:3;

Min operating temperature, Tmin:-20 °C; Brand:NTN; C:30 mm; rs min:0.3 mm; Inner ring reference:1R25X29X30; Radial clearance class:CN; Nlim (oil):14,000 rpm; Precision class:P0; d:25 mm; Lubrication hole on outer ring:Oui/Yes;

H:39.7 mm; H1:14.5 mm; T max.:200 °C; J:119 mm; L:161.5 mm; A:41.5 mm; Recommended tightening torque for set screw:5.5 Nm; T min.:-20 °C; Designation of bearing:EX206G2T20; s1:34.1 mm;

Note:This product line wa; Cor - Static Load Rating:111505 lbf; Dimension L:500 mm; Dimension H:150 mm; Cr - Dynamic Load Rating:81606 lbf; Bearing UPC:013992027030; Ca - Axial Load Rating:4990.69 lbf; Maximum Speed:1740 rpm; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension J:420 mm;

Mass:0.02 kg; Characteristic inner ring frequency, BPFI:4.93 Hz; d:12 mm; Characteristic cage frequency, FTF:0.38 Hz; rs min:0.3 mm; Dynamic load, C:5.1 kN; Characteristic rolling element frequency, BSF:4.07 Hz; f0:13.2; ra max:0.3 mm; D:28 mm;

Dz:110 mm; Recommended tightening torque for set screw:16.8 Nm; L:140 mm; B:55.6 mm; S:22.2 mm; C:43.55 kN; H1:14 mm; L1:47 mm; G:M6x1; Designation of housing:PA211N-;

D:160.000 mm; G2 - Heat Generation Factor (Rib-Roller End):26.7; Da - Cup Frontface Backing Diameter:150.10 mm; C - Cup Width:45.000 mm; Db - Cup Backface Backing Diameter:140.97 mm; Y - ISO Factor4:1.74; Series:32315M; Design Units:METRIC; r - Cup Backface To Clear Radius1:2.54 mm; K - Factor2:1.69

Shape:T-Shaped; Bearing I.D. d(mm):25; Shape:T-Shaped; Height Indication:Height Configurable; Number of Bearings:Single; Seals:VV (Non-Contact Rubb; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; RoHS:6;

Series:335; G2 - Heat Generation Factor (Rib-Roller End):13; B - Cone Width:0.8820 in; da - Cone Frontface Backing Diameter:1.81 in; d:1.6250 in; Ab - Cage-Cone Frontface Clearance:0.07 in; Aa - Cage-Cone Backface Clearance:0 in; G1 - Heat Generation Factor (Roller-Raceway):26.5; C1 - Dynamic Radial

B:49.2 mm; Z:23.2 mm; H:49.2 mm; A:54 mm; L:184 mm; J:137 mm; A1:34 mm; Recommended tightening torque for set screw:8 Nm; L1:52 mm; d:38.1 mm;

A1:11 mm; e:19 mm; A2:45.9 mm; G:R1/8"; Dz:60 mm; A:30 mm; T min.:-20 °C; C:14 kN; B:34.8 mm; J:70 mm;

Designation of bearing:EX312G2L3; Designation of housing:C312-; B1:79.4 mm; Weight:5.09 kg; A5:30.9 mm; H:160 mm; s1:54.85 mm; T max.:100 °C; A:46 mm; d:60 mm;

Recommended tightening torque for set screw:3.7 Nm; A:32 mm; C0:6.65 kN; B:34 mm; s1:30.5 mm; Designation of bearing:EX203-11G2; N1:17 mm; L:126.5 mm; N:11mm; T max.:100 °C;